Keɓaɓɓen Ƙira Na Musamman Brush Oak Spc Gidan shimfidar katako

Takaitaccen Bayani:

Farashin SPCƘayyadaddun Falo
Girman 1220*125(48''x5.0'')// 1220*168(48''x6.7'')// 910*125(36''x5.0''))
Spc Core Kauri 4.5mm, 5mm, 5.5mm, 6mm
Kauri Veneer 0.6mm, 1mm
Jimlar Kauri 5mm, 5.5mm, 6mm, 6.5mm, 7mm
Babban darajar AB, ABC, ABCD


Cikakken Bayani

Nuni Launi

Shigarwa

Takardar Fasaha

Tags samfurin

Tsarin

Wood-Veneer-SPC-flooring
36
41
37
42
38
43
39
44
40
45

Cikakkun Hotuna

11

Ƙayyadaddun bayanai

Farashin SPCƘayyadaddun Falo
Girman 1220*125(48''x5.0'')// 1220*168(48''x6.7'')// 910*125(36''x5.0''))
Spc Core Kauri 4.5mm, 5mm, 5.5mm, 6mm
Kauri Veneer 0.6mm, 1mm
Jimlar Kauri 5mm, 5.5mm, 6mm, 6.5mm, 7mm
Babban darajar AB, ABC, ABCD
Nau'in Veneer Itacen itacen oak, TEK, CHERRY, GALNUT
Gama Waya Brushed, Flat
Surface Rufin UV: 5 undercoat, 2 fifinishcoat
Danna Tsarin Unilin Danna, Kulle Kulle (I4F)
Magani na musamman V-Groove, Mai hana Sauti EVA/IXPE
Hanyar shigarwa Yawo

Taimakon bene na SPC

IXPE-Backing

Tallafin IXPE

Plain-EVA-Backing

Taimakon EVA a bayyane

Samfuran Rubutun Sama

Smooth-Surface-Engineered-Flooring

Ƙwararren Ƙwararren Ƙwararren Ƙasa

Light-Wire-Brushed-Engineered-Flooring

Wuraren Wutar Wuta Mai Haɓakawa

Haɗin gwiwa na shimfidar shimfidar Spc

hardwood-spc-flooring

katako spc dabe

Menene Bambanci Tsakanin 100% Budurwa Spc Flooring da Sake Fa'idar Spc Flooring?

0308

Gwajin Ingantacciyar Ruwa Mai Tsabtace Dani Spc

Jerin Shiryawan bene na SPC

GIRMA PCS/BOX M2/BOX Akwatin/PALLET PALLET/20FT M2/20FT
910x125x5mm 10 1.1375 94 20 2138.5
1220 x 125 x 5 mm 10 1.525 70 20 2135
1220x150x5mm 10 1.83 58 20 2122.8

Amfani

SPC-Floor-Anti-scracth-Test

Gwajin Gwajin Ƙaƙwalwar Ƙasa ta SPC

SPC-Floor-Fireproof-Test

Gwajin hana Wuta na bene na SPC

SPC-Floor-Waterproof-Test

Gwajin hana ruwa na bene na SPC

Aikace-aikace

DE17013-3
IMG_6194(20201011-141102)
Grey-Oak
IMG-20200930-WA0021
IMG_4990(20200928-091524)

Blackbutt Spc Project a Ostiraliya - 1

1
3
2

Spotted Gum Spc Flooring Project a Ostiraliya - 2

9
6
8
5
7
4

Tsarin Kariyar bene na SPC

1-Workshop

1 Taron bita

5-SPC-Health-Board

4 Hukumar Lafiya ta SPC

8-SPC-Click-Macking-Machine

7 SPC Danna Macking Machine

11Warehouse

10 Gidan ajiya

2-SPC-Coextrusion-Machine

2 SPC Coextrusion Machine

6-SPC-Quality-Test

5 Gwajin ingancin SPC

9-Foam-Adding-Machine

8 Injin Ƙara Kumfa

12-Loading

11 Lodawa

3-UV-Machine

3 UV Machine

7-SPC-Cutting-Machine

6 SPC Yankan Machine / karfi>

10-Laboratory

9 Laboratory


  • Na baya:
  • Na gaba:

  • about17A. Drop Click Spc Flooring Installation

     

    about17B. Unilin Click Spc Flooring Installation

     

    about17HANYAR SHIGA BANA SPC

     

    1. Da farko, ƙayyade yadda kuke son bene ya gudana.Yawanci don samfuran katako, shimfidar bene yana tafiyar da tsayin ɗakin.Ana iya samun keɓancewa tunda duk batun fifiko ne.

    2. Don guje wa kunkuntar faɗin katako ko gajerun tsayin alluna kusa da bango/ƙofofi, yana da mahimmanci a yi wasu tsarawa.Yin amfani da faɗin ɗakin, ƙididdige cikakken allon allon nawa ne za su dace da wurin da sauran sarari waɗanda za su buƙaci a rufe da katako.Raba sauran sarari biyu don ƙididdige faɗin faɗuwar katako.Yi haka tare da tsayi.

    3. Lura cewa jere na farko na katako baya buƙatar gyarawa a cikin nisa, zai zama dole a yanke harshen da ba a goyan baya ba don haka mai tsabta, m gefen bango yana zuwa bango.

    4. Ya kamata a kiyaye ramukan fadada 8mm daga bango yayin shigarwa.Wannan zai ba da damar sararin samaniya gibin faɗaɗa dabi'a da raguwar katako.

    5. Ya kamata a shigar da katako daga dama zuwa hagu.Daga saman kusurwar dama na dakin, sanya katako na farko a wuri don duka biyun kai da gefen kabu sun fito fili.

    6. Shigar da katako na biyu a jere na farko ta hanyar karkatar da ɗan gajeren harshe na gefen cikin dogon gefen katako na farko.

    7. Don fara jere na biyu, yanke katako wanda ya fi guntu aƙalla 152.4mm fiye da katako na farko ta hanyar saka dogon harshe na gefe a cikin ramin katako a jere na farko.

    8. Shigar da katako na biyu a jere na biyu ta hanyar saka ɗan gajeren harshe na gefe a cikin tsagi mai tsayi na gefe na farko da aka shigar a baya.

    9. Daidaita katako ta yadda gajeriyar titin harshen gefen ta kasance a kan madaidaicin leben katako a jere na farko.

    10. Yin amfani da ƙarfi mai laushi kuma a kusurwar digiri 20-30, tura ɗan gajeren harshe na gefe zuwa cikin tsagi na katako mai kusa ta hanyar zamewa tare da dogon gefen gefe.Kuna iya buƙatar ɗaga katakon zuwa damansa kaɗan don ba da damar yin aikin "zamiya".

    11. Za a iya shigar da sauran katako a cikin dakin ta amfani da wannan fasaha.Tabbatar cewa ana kiyaye gibin faɗaɗa da ake buƙata akan duk kafaffen sassa na tsaye (kamar bango, kofofi, kabad da sauransu).

    12. Za a iya yanke katako cikin sauƙi da wuka mai amfani, kawai a zura saman katakon sannan a datse katakon gida biyu.

    about17Spc shimfidar shigarwa zane

    installation

    Halaye Ƙayyadaddun Gwaji da Sakamako
    Girma (a cikin inci) 1220*125 (48"x5.0")
    Jimlar Kauri 6.5mm ku
    Abin da aka makala / Taimakawa 1.5mm ko 2.0mm IXPE da Eva
    Kauri Veneer 0.6mm, 1mm
    Babban darajar AB, ABC, ABCD
    Nau'in Veneer Itacen itacen oak, TEK, CHERRY, GALNUT
    Girma da Haƙuri ASTM F2055 - Yana wucewa - +0.016 a kowace ƙafar layi
    Kauri ASTM F386 - Wucewa - Naƙasasshe +0.005 in.
    sassauci ASTM F137 - Wuce - ≤1.0 in., babu tsagewa ko karye
    Ƙarfafa Girma ASTM F2199 - Yana wucewa - ≤ 0.024 in. kowace ƙafar madaidaiciya
    Kasancewar Karfe Mai nauyi / Rashi TS EN 71-3 C - Haɗu da ƙayyadaddun bayanai(Lead, Antimony, Arsenic, Barium, Cadmium, Chromium, Mercury da Selenium).
    Resistance Generation Hayaki TS EN ISO 9239-1 Sakamako Mai Mahimmanci 9.1
    Juriya na Ƙarfafa Hayaki, Yanayin Ƙunƙara EN ISO
    Flammability ASTM E648- Matsayi na 1
    Ragowar Shiga ASTM F1914 - Yana wucewa - Matsakaicin ƙasa da 8%
    Iyakar Load A tsaye ASTM-F-970 Ya wuce 1000psi
    Abubuwan Bukatun Wear Group pr TS EN 660-1 Rashin Kauri 0.30
    Juriya Zamewa ASTM D2047 - Wuce -> 0.6 Rigar, 0.6 bushe
    Juriya ga Haske ASTM F1515 - Wucewa - ∧E ≤ 8
    Juriya ga Zafi ASTM F1514 - Wuce - ∧E ≤ 8
    Halin Lantarki (ESD) TS EN 1815: 1997 2.0 kV lokacin da aka gwada a 23 C + 1 C
    Ƙarƙashin Ƙarƙashin Ƙasa Dace don sakawa a ƙarƙashin dumama ƙasa.
    Curling Bayan Fuskantar zafi EN 434 <2mm wucewa
    Abun ciki na Vinyl da aka sake fa'ida Kusan 40%
    Maimaituwa Ana iya sake yin fa'ida
    Garanti na samfur Shekaru 10 na Kasuwanci & Matsayin Shekaru 15
    Floorscore Certified Takaddar Takaddar Da Aka Bata Bayan Buƙata
    Ku rubuta sakonku anan ku aiko mana

    KAYANE masu alaƙa