Qaab dhismeedka
Faahfaahinta Sawirada
Tilmaamid
| SPCTilmaamida Dabaqaha | |
| Cabbirka | 1220*125 (48''x5.0'') // 1220*168 (48''x6.7'') // 910*125 |
| Dhumucda xudunta u ah Spc | 4.5mm, 5mm, 5.5mm, 6mm |
| Dhumucda humaagga | 0.6mm, 1mm |
| Wadarta Dhumucda | 5mm, 5.5mm, 6mm, 6.5mm, 7mm |
| Darajada xiniinyaha | AB,ABC,ABCD |
| Noocyada Lafaha | Oak, TEAK, cherry, walnut |
| dhame | Silig caday, Flat |
| Dusha sare | Dahaarka UV: 5 jaakad hoose ah, 2 koofiish ah |
| Guji System | Unilin Guji, Quful Quful (I4F) |
| Daawaynta gaarka ah | V-Groove, Dhawaqaha EVA/IXPE |
| Habka Rakibaadda | sabayn |
Sida loo hubiyo tayada sagxadda biyuhu aanay biyuhu lahayn ee SPC?
SPC BIYAHA BIYAHA HOOS KA DHIGAN waa dabaq balaastiig ah.Tartanka warshadaha SPC awgeed, tayada alaabadu waa mid aan sinnayn.Si macaamiishu si buuxda ugu fahmaan SPC FLOORING oo ay doortaan sagxadaha tayada sare leh, soo socda ayaa ah habka gaarka ah:
1.
Sida qaybaha ugu muhiimsan ee dabaqa SPC waa caag iyo budada calcium.Balaastiggu guud ahaan waxay ka yimaadaan laba ilood, mid waa balaastiig dib loo warshadeeyay, tan kalena waa walxo cusub.Farqiga qiimaha u dhexeeya labada waa in ka badan 1 jeer.Waxay si toos ah u saameyneysaa tayada dabaqa.Caagagga dib loo warshadeeyay waxaa ku jira biro badan oo culus iyo wasakh.Haddii maqaarku taabto dabaqyadan oo kale muddo dheer, waxay waxyeelo u geysan doontaa jirka.Marka labaad, tayada gudaha ee dabaqa noocan ah waa mid aan degganeyn.Marka heerkulku sare u kaco, sagxadda biyuhu ee Spc waa la hagaajin doonaa.Marka heerkulku aad u hooseeyo, sagxaddu waa dhinmi doontaa, sagxadduna waxay yeelan doontaa daldaloolo.Balaastiga 100% ee SPC SAG waa cusub oo aan wasakhayn, oo waafaqsan caagadeena caaga ah ee biyaha la cabbo ee caadiga ah la isticmaalo.
Habka ogaanshaha, a, eeg haddii ay jiraan joornaalo ku yaal dusha sare ee xudunta Spc, sida foil aluminium ama dhibco madow;b, fiiri midabka, guud ahaan mugdi waa dib loo warshadeeyay Spc;caddaanku waa Vigin Spc.
2.
Sagxada SPC, saamiga balaastigga iyo budada kaalshiyamku guud ahaan waa 1:3.Habkani waxa uu u fiican yahay xasilloonida tayada.
Sababtoo ah qiimaha caaggu waa qiyaastii 1200USD/TONS, qiimaha budada calcium waa qiyaastii 80USD/TONS.
Si loo dhimo kharashaadka, shirkado badan ayaa ku hagaajin doona saamiga caanaha ilaa 1:3.8 ama 1:4.0.Habkani wuxuu hoos u dhigi doonaa tayada alaabta, kordhinta miisaanka sagxadda, kordhinta kharashka gaadiidka, sidoo kale wuxuu sababi doonaa dabaqa in uusan lahayn wax adag oo sahlan in la jebiyo.
Habka lagu ogaanayo: Isku laab dabaqa kala bar.Haddii sagxaddu ay fududahay in la jebiyo, waxay caddaynaysaa in saamiga budada kalsiyumku uu sarreeyo, tayada ma fiicna, qiimuhuna waa yar yahay.
Kaalmada Dabaqa ee SPC
Taageerada IXPE
Taageerada cad ee Eva
Dusha sare ee Textures waa la heli karaa
Sagxadda Dabaqan ee Wanaagsan ee la Injineeyay
Silig khafiif ah oo la cadayday Dabaqa Injineerka
Isku-dhafka sagxadaha Spc
sagxadda alwaax spc
Waa maxay Farqiga udhaxeeya 100% Dabaqa Virgin Spc iyo Sagxada Spc dib loo warshadeeyay?
Tijaabada Tayada Biyaha Aan Lahayn ee Spc
Liiska Xidhmada Dabaqa ee SPC
| QAYBKA | PCS/BOX | M2/SANDUUQA | SANDUUQ/SOOMAAL | PALLET/20FT | M2/20FT |
| 910x125x5mm | 10 | 1.1375 | 94 | 20 | 2138.5 |
| 1220x125x5mm | 10 | 1.525 | 70 | 20 | 2135 |
| 1220x150x5mm | 10 | 1.83 | 58 | 20 | 2122.8 |
Faa'iidada
Tijaabada ka hortagga xoqitaanka sagxada SPC
Baaritaanka Dabaqa Dabka ee SPC
Imtixaanka Dabaqa ee SPC ee biyuhu
Codsiyada
Mashruuca Dabaqa Blackbutt Spc ee Australia - 1
Mashruuci Sagxada Xajka Spc ee Australia - 2
Habka Ilaalinta Dabaqa ee SPC
1 Workshop
4 Guddiga Caafimaadka ee SPC
7 SPC Riix Macking Machine
10 Bakhaar
2 SPC Coextrusion Machine
5 Imtixaanka Tayada SPC
8 Mashiinka Xumbo Ku Darida
11 Soodejinaya
3 Mashiinka UV
6 Mashiinka Goynta SPC/strong>
9 Shaybaadhka
A. Riix Rakibaadda Dabaqadda Spc
B. Unilin Guji Rakibaadda Dabaqa Spc
Habka rakibida sagxada SPC
1. Marka hore, go'aami sida aad rabto in sagxaddu u socoto.Caadi ahaan alaabta looxa, sagxaddu waxay socotaa dhererka qolka.Waxaa laga yaabaa inay jiraan waxyaabo ka reeban maadaama ay dhammaan tahay arrin la doorbidayo.
2. Si aad uga fogaato ballaadhka looxa dhuuban ama dhererka looxyada gaagaaban ee darbiyada/albaabada agtooda, waxaa muhiim ah in la sameeyo qorshe hore.Adiga oo isticmaalaya ballaca qolka, xisaabi inta loox oo buuxa oo ku habboon aagga iyo inta boos ee ka hadhay ee u baahan doona in lagu daboolo looxyo qayb ah.Meesha soo hartay laba u kala qaybi si aad u xisaabiso ballaca looxyada qayb ahaan.Isla sidaas oo kale u samee dhererka.
3. Ogsoonow in safka hore ee looxa uusan u baahnayn in la gooyo ballac ahaan, waxay noqon doontaa lagama maarmaan in la gooyo carrabka aan la daboolin si ay nadiif ah oo adag u noqoto derbiga.
4. 8mm farqiga ballaarinta waa in laga ilaaliyaa derbiga inta lagu jiro rakibidda.Tani waxay u ogolaan doontaa meel bannaan oo bannaan balaadhinta dabiiciga ah iyo foosha ee looxyada.
5. Looxyada waa in lagu rakibaa midig ilaa bidix.Laga soo bilaabo cidhifka midig ee sare ee qolka, dhig looxa ugu horreeya ee meesha si ay labada madaxa iyo tolmada dhinacyadu u muuqdaan.
6. Ku rakib looxa labaad ee safka kowaad adigoo xagal u siinaya carrabka dhinaca gaaban ee jeexdin dhinaca dheer ee looxa kowaad.
7. Si aad u bilawdo safka labaad, gooy loox ka gaaban looxa ugu yaraan 152.4mm ka yar adiga oo afka dhinaca dheer gelinaya godka safka hore ee looxa.
8. Ku rakib looxa labaad ee safka labaad adigoo gelinaya carrabka dhinaca gaaban ee hore loo rakibay looxa dhinaca dheer ee hore.
9. Isku toosi looxa si cidhifka carrabka dhinaca gaaban uu u dul istaago bishinta jeexdin ee looxa safka kowaad.
10. Adigoo isticmaalaya xoog dabacsan oo xagal 20-30 darajo ah, ku riix carrabka dhinaca gaaban ee godadka looxa ku dheggan adiga oo ku sixiya dhinaca tolka dheer.Waxa laga yaabaa in aad u baahato in aad u yar kor u qaaddo looxa dhinaca midigta si aad u oggolaato ficilka "simbiriirixidda".
11. Looxyada soo haray waxaa lagu dhejin karaa qolka iyadoo la adeegsanayo farsamo isku mid ah.Hubi in meelaha banaan ee balaadhinta loo baahan yahay lagu ilaaliyo dhammaan qaybaha toosan (sida gidaarada, albaabada, armaajooyinka iwm).
12. Looxa waxaa si fudud loogu goyn karaa mindi adeeg, kaliya dhali dusha sare ee looxa oo labo u kala qaad.
Naqshadaynta sagxadaha sagxada Spc
| Sifada | Tilmaamaha Imtixaanka iyo Natiijada |
| Cabbirrada (ininch) | 1220*125 ( 48 "x5.0") |
| Wadarta Dhumucda | 6.5mm |
| Lifaaqa / Taageerada | 1.5mm ama 2.0mm IXPE iyo EVA |
| Dhumucda humaagga | 0.6mm, 1mm |
| Darajada xiniinyaha | AB,ABC,ABCD |
| Noocyada Lafaha | Oak, TEAK, cherry, walnut |
| Baaxadda iyo Dulqaadka | ASTM F2055 - Gudub - +0.016 cag toosan |
| Dhumucda | ASTM F386 - Gudub - Magac ahaan +0.005 in. |
| Dabacsanaan | ASTM F137 - Gudub - ≤1.0 in., ma dillaaco ama dillaac |
| Deganaanshaha cabbirka | ASTM F2199 - Gudub - ≤ 0.024 in. cag toosan |
| Joogitaanka Birta Culus / Maqnaanshaha | TS EN 71-3 C - Waxay buuxisay shuruudaha(Lead, Antimony, Arsenic, Barium, Cadmium, Chromium, Mercury iyo Selenium). |
| Iska caabinta Jiilka qiiqa | TS EN ISO 9239-1 (Flux Halis ah) Natiijooyinka 9.1 |
| Iska caabinta Jiilka qiiqa, Qaabka aan ololayn | EN ISO |
| Daboolida | ASTM E648- Heerka 1 Qiimaynta |
| Gelitaan Hadhaaga ah | ASTM F1914 - Gudub - Celcelis ahaan in ka yar 8% |
| Xadka Load Joogta ah | ASTM-F-970 wuxuu dhaafaa 1000psi |
| Shuruudaha Wear Group pr | EN 660-1 Dhumucda dhumucda 0.30 |
| Iska caabin simbiriirixan | ASTM D2047 - Gudub -> 0.6 qoyan, 0.6 qallalan |
| Iska caabinta Iftiinka | ASTM F1515 - Gudub - ∧E ≤ 8 |
| Iska caabinta kulaylka | ASTM F1514 - Gudub - ∧E ≤ 8 |
| Dhaqanka Korontada (ESD) | TS EN 1815: 1997 2,0 kV markii lagu tijaabiyay 23 C+1 C |
| Kuleylinta Dabaqa hoose | Ku habboon rakibida kuleyliyaha sagxadda hoostiisa |
| Ku-laabashada Ka dib Kulaylka Soo-gaadhista | EN 434 <2mm kaarka |
| Waxyaabaha Vinyl-ka dib loo warshadeeyay | Ku dhawaad 40% |
| Dib u warshadaynta | dib ayaa loo warshadayn karaa |
| Damaanadda Alaabta | 10-Sano Ganacsi & Deganaanshaha 15-Sano |
| Floorscore shahaado | Shahaadada la bixiyo Marka la codsado |
